BIG MeSQUAREsPrice: $8.00 |
|
 |
 |
RECENTLY REVISED BIG MeSquares 2x
BIG MeSquares panels NOW have 156 square Limerick construction pads on the top side and 156 squares on the bottom side which have 4/3/2 SMALL squares inside each 1/4" square. SO you can snap off a 1/4 square and glue it bottom side down ending up with a large pad in your project....OR you can glue it top side down ending up with a group of 4/3/2 small pads in a *clump*. The panels are still .031" thick so still easily snapped apart into 1/4" squares where each pad is pre-tinned and has a solder mask and silk screen outline around each pad. No metal punches required!
Little MeSquares (full sheet) have been discontinued due to cost of all those v-scores....
A mini STIX panel little squares is available with less v-scores...
OLD Big MeSquares DESCRIPTION
BIG MeSQUARES panels have 225 square Limerick construction pads which are easily snapped apart and then glued down. Each pad is .25 inches square, pre-tinned and has a solder mask and silk screen outline around each pad. No metal punches required!
Check out the entire line of QRPme paddyboards:
LITTLE MeSquares
MePADSs for DIP ICs
MePADSs for SOICs
MePADSs for SMT devices
MePADSs for vacuum tubes
MePADSs (4) for OCTAL socket vacuum tubes
MePADSs (4) for MINIATURE vacuum tubes
Here is a link to AA7EEs great project using MePads & MeSquares
Here is a link to another of AA7EEs great projects using MePads & MeSquares& MeSquares